Why Doesn’t My Water Feature Have a Plug?
Many of our water features are supplied without a plug. While it might seem counterintuitive this is actually done to make installation easier. Many people prefer to install their water feature by threading the cable through an external wall and from there into the mains electricity supply, to do this the plug must be removed – so for simplicity’s sake we often opt to supply without a plug to make this process easier, especially in the case of larger water features. While it is still possible to plug your water feature in conventionally using an extension cord, even this, with an outside feature, has to involve a fully weather resistant plug casing or box for the connection for safety reasons. Primrose supply such boxes from Dribox which offer a good solution.
Please Note: Primrose always recommends getting a qualified electrician to do any electrical work that may be needed when installing a water feature.
How Much Water Does a Water Feature Use? How Often Should I Top It Up?
Another running cost associated with water features is water usage, especially if you are on a metered supply. However – all our water features are either designed for pond use or self contained, which means none of them need to be connected to a mains water supply. While they will need topping up occasionally with fresh water, especially in hot weather when the water evaporates quickly, the water use associated with most of our water features is minimal.
Please Note: With all water features containing a pump it is important to keep the water feature topped up when running – this is because the pump must remain submerged when switched on. If the pump emerges from the water due to evaporation, this has the potential to cause damage to the pump and reduce its lifespan.
How Much Electricity Does a Water Feature Use? Can It Be Left On?
How much will running a water feature set you back?The amount of electricity a water feature uses is generally dependent on the pump type and size, specifically the wattage of the pump attached to the water feature. On most of our product pages for water features we have the wattage indicated under the specifications.
To calculate how much a water feature will cost to run per hour, simply enter your pence per kWh electricity rate, found on your electricity bill, and times it by the wattage on the product page. For example if we take one of our larger water features, the Stone Effect Regal Three Tier Fountain we can see it has has a Pump Wattage of 12W, so times that by the average UK electricity rate of roughly 13p per kWh and we get a cost of 0.16 pence per hour, or 3.7 pence a day if left running constantly. This translates to less than a fan or electric heater, so it doesn’t cost as much as you might think to have the sound of running water going constantly.
Of course, if you opt for a water feature from our solar range, you won’t have to worry about running costs at all!
What Steps Should I Take to Care for My Water Feature in Winter?
Please see this guide for tips on protecting your water feature against frost in winter.
When Will a Solar Water Feature Run and Not Run?
Solar water features are great in that they are entirely self contained, however due to their reliance on the sun’s rays, there are certain situation where they won’t run, for example on overcast days or at night. You can extend the period time a solar water feature will function by purchasing one with a battery back up, this can store up to three hours of pump life in the battery, however it is important to note that in order to charge the battery the features must be left in prolonged sunlight for a period of time, so even solar water features with a battery backup may not have much life in the winter months.
–
Charlie works in the Primrose marketing team, mainly on online marketing.
When not writing for the Primrose Blog, Charlie likes nothing more than a good book and a cool cider.